Won’t your TCL TV power on all of a sudden? When you encounter this issue, you can no longer binge-watch your favorite show or movie on your TCL TV. As TCL Smart TVs bring home the best entertainment in high resolution, up to 4K, you will miss out on many things when you cannot power on your TV. If you’ve ended up on the page looking for a suitable fix, you’ve made the right decision.
Identifying the reasons for the issue can help you figure out suitable ways to solve the problem. Usually, the blame can be on the power connections of your TV. But you can’t ignore the other reasons as they can be equally responsible for your TV not turning on. Before you opt for a replacement, you can try our best troubleshooting fixes to turn on the TCL Smart TV that won’t power on and stream your desired content on the TV seamlessly.
Why Does my TCL Smart TV Not Turning On
Before you get started with the fixes, you should know about the possible causes of the issue. Find below some of the reasons why your TCL TV won’t turn on:
Information Use !!
Concerned about online trackers and introducers tracing your internet activity? Or do you face geo-restrictions while streaming? Get NordVPN - the ultra-fast VPN trusted by millions, which is available at 69% off + 3 Months Extra. With the Double VPN, Split tunneling, and Custom DNS, you can experience internet freedom anytime, anywhere.
- Faulty power cable connections
- Incorrect input source selected
- Dust or dirt inside your TV
- Minor bugs or glitches with your TCL TV
- Unresponsive remote
Possible DIY Fixes for TCL Smart TV Not Turning On
If your TCL Smart TV refuses to power on, you can try our troubleshooting fixes one by one in the given order to fix the problem manually without the need for a service professional.
Check the Status Light on TCL TV
All TCL TVs will have an LED light at the bottom of the TV. Your TV is on standby mode when the light is blinking, but the TV is not turning on. You can notice the light turning off when you press the power button on your TCL TV. At the same time, the standby light will blink whenever you hit any button on the TV remote control. Using the status light, you can easily identify if the problem is with the power running to your TV or not.
Press the Power button on the remote control to check if it has any impact on the standby light on your TV. Does the standby light stay white or turn off while pressing any button on the remote? If this happens and your standby light does not blink, then the problem is not with the power running to your TCL TV. When that’s the case, you can move on with our troubleshooting solutions to fix the issue in no time.
Check the Power Connections
As a first step, you should check if there is any issue with the connections on your TV. If the cord connections are faulty, your TV won’t receive a proper power supply. As a result, you can’t power on your TV. To rectify the problem,
- Connect the power cord of your TCL TV properly into the socket. If the cord connections are loose, there will be an issue with the power running to your TV. Your TV will not power on in such a case.
- For cords built-in to your TV, you can check if there is any damage that raises an alarm. If you notice any physical damage, obtain a replacement if you’re under warranty. Ensure the cord is securely plugged in if it is a standalone cord.
- Confirm the HDMI cables are plugged in correctly to the correct inlet. Also, make sure the cables are not frayed or broken internally.
- Connect the power cord of your TV to a different outlet and check if your TV turns on without any trouble.
- After switching different outlets, press and hold the power button on your TCL TV for 15 seconds. Your TV should power on now if the issue is with the outlet you used before.
You can even disconnect every cord and reconnect them to make sure the connections are firmly placed. If your TV does not turn on after ensuring there is no problem with the power connections, move to the next fix.
Clean the Debris Out Of Your TCL TV
Your TCL TV will have sensitive connectors to transfer power and data. Dust or dirt can accumulate in these places over time and prevent the cables from transmitting power from the power source to your TV. To avoid this problem, you can regularly clean every port and power point in a gentle manner using a clean cloth.
After cleaning the debris out of your TCL TV, your TV will get an uninterrupted power supply. Thus, your TV can power on and let you watch your favorite content.
Make Sure Your Remote is Working
Sometimes, the issue can also occur because of an unresponsive TV remote. If your cable connections are firmly placed, your next focus should be the TV remote. Take your TCL TV remote and point it directly at your TV. Now, hit the power button on the remote and check if your TV turns on effortlessly.
If your remote is at fault, you can’t power on your TCL TV using the remote. Locate the power button below the TCL logo on your TV and hit the button. If your TV powers on and displays the home screen, then you can be assured that there is an issue with the remote. Before you go for an original replacement, you must make sure the batteries are not dead or low.
Most often, dead batteries can be the reason why your TV remote does not work well. Replace the old remote batteries with new ones and ensure they are installed correctly in the remote. While using a remote, make sure it is compatible with your TCL TV.
Power Cycle Your TCL TV
If there are any minor faults in the TCL TV, you can perform a power drain on your TV as a suitable fix. Using the below-given steps, you can drain the residual electricity and help your TV power on.
1. Remove the power cord of your TCL TV from the power source.
2. Now, select the power button on your TV and hold it down until it completely drains the electricity from your TV capacitors.
3. Plug the power cable of your TV back into the power outlet and try turning on your TCL TV.
A power drain on your TCL TV should fix any minor bugs within your TV. If you still can’t turn on your TV, you can proceed with the next fix.
Choose the Correct Input Source
There are multiple input sources in the TCL Smart TV, including HDMI ports, antenna, and more. When you choose the incorrect input source, you can face issues, such as sync errors, no signal, and TV not turning on. Switch to a different input source on TCL TV and check if your TV now turns on. If your TV powers on but does not move to the home screen, you can pick the correct input source using the below-given steps.
1. On the TCL TV or remote, press the power button to turn it on.
2. Hit the Input or Source button on the remote to display the source list.
3. Choose the correct input source.
Make sure to choose the active sources on your TCL TV. Inactive sources are usually greyed out.
Factory Reset Your TCL TV
Is your TV still not turning on? Then, there can be a hardware issue on your TCL Smart TV. Finally, you can factory reset your TCL smart TV to fix the issue. Doing a reset will wipe all the data, including configurations, passwords, etc., on your TV. Before starting the process, you must be aware that you can only reset your TCL TV if your TV powers on with no visuals or audio.
1. Hit the Settings button on the TCL Smart TV remote control.
2. From the TV Settings menu, scroll down and choose the More Settings option.
3. Tap on the Device Preferences option followed by Reset.
4. Choose Factory Data Reset and click Erase Everything to factory reset your TCL TV.
Choosing this option will restore your TV to default settings. After the reset process is over, try turning on your TCL Smart TV.
Note: You can use the paper clip to press the reset button on your TCL Roku TV and hold it for 30 seconds to reset your TCL Roku TV.
Contact Support Team
Seeking professional help will be handy when none of the above fixes work for you. You can contact Customer Support of TCL to get technical guidance. Based on the make and model of your TCL TV, they might provide a suitable solution for the issue. You can also find your issue listed on the official webpage of the TCL Smart TV.
Replace TCL TV By Claiming Warranty
If your TCL TV is still under warranty, you can file a service request through TCL’s official support page. While filing a service request, ensure that you’ve filled in all the required details and uploaded supporting documents of the product purchase. You can even get a replacement by contacting their support team.
You can go for newer options available in the market if you can’t get a replacement. Look for the best options at reasonable prices and make a purchase.
FAQ
If your TCL TV does not turn on while displaying a black screen, you need to check for signal interference and rectify it. Also, restart your TCL TV to fix any minor issues with the TV.
Yes, there is a reset button near the connector panel on TCL Roku TV.
If your TCL TV turns on but displays no picture, you can check your TV’s status light, restart your TV, check the connections, and reset your TV to fix the problem.
Disclosure: If we like a product or service, we might refer them to our readers via an affiliate link, which means we may receive a referral commission from the sale if you buy the product that we recommended, read more about that in our affiliate disclosure.