While setting up your TCL Smart TV, your TCL remote will automatically pair without initiating any additional steps. On the other hand, if you’ve purchased a new one or lost the connection, you must manually pair the TCL remote with your TV using pairing buttons or remote keys. However, the pairing process varies a bit according to the operating system that your TCL TV is running on. But you don’t need to worry about that, as we got you covered.
After a successful pairing, you can use the TCL remote control to perform several actions like installing apps, surfing the web, navigating settings, and many more without strain.
This article will give you crystal-clear guidance to help you pair your TCL remote with your TCL smart TV according to the operating system.
Information Use !!
Concerned about online trackers and introducers tracing your internet activity? Or do you face geo-restrictions while streaming? Get NordVPN - the ultra-fast VPN trusted by millions, which is available at 69% off + 3 Months Extra. With the Double VPN, Split tunneling, and Custom DNS, you can experience internet freedom anytime, anywhere.
Pre-Requisite
- Buy a TCL remote if you lost one.
- Make sure to use the new batteries for your TCL remote.
- Operate the remote within the range of 3 Feet.
Pairing TCL Fire Remote to TCL Fire TV
Most TCL Fire TV remotes will connect automatically to their TVs as soon as they are turned on. In case the connection is not established on its own, then follow the below steps to initiate the pairing process.
1. Connect your TCL Fire TV cables to the power outlet and switch it on.
2. Turn on your TCL Fire TV by pushing the Power button.
3. On your TCL Fire TV remote, press the Home button for about 10 seconds.
4. Hold the button until you see the “Press Play/Pause button to Start.”
5. Once selected, your remote will be paired to TCL Fire TV.
After a successful pairing, you can use the remote control to browse the web, navigate to settings, and install apps on your TCL Smart TV.
Note: If you face difficulties in pairing the remote control, use the remote control instruction (manual book) catalog that comes along with the TCL remote.
How to Pair TCL Roku Remote to TCL Roku TV
Whether you are using the voice remote or the enhanced one, the below steps will help you get it paired to your TCL Roku TV.
1. Plug the cables into the power outlet and turn on your TV.
2. Fetch the TCL Roku TV remote and open the battery compartment to find the Pairing button.
3. You need to press and hold the button for 4 seconds until the light starts flashing.
4. Wait for half a minute for the remote to establish the connection with the TV.
5. The battery status of the enhanced remote will appear on your screen to confirm the pairing.
6. Now, you are ready to use your new TCL Roku remote to navigate through the controls of your TV.
Note: If you are using the standard IR remote, then the pairing will be established automatically as soon as you press the Power button on your remote.
Pairing TCL Android Remote to TCL Android TV
Pairing your TCL remote with the TCL Android TV is quite easy. You can pair the remote within seconds by going through the below steps.
1. Turn on your TCL Android TV and fetch your remote.
2. On your remote, locate the Home button as well as the OK button.
3. Press and hold the buttons simultaneously for about 10 seconds to initiate the connection.
4. Once the stipulated time has been over, the TCL remote will be paired with your TV.
How to Pair TCL Google Remote to TCL Google TV
The remote pairing process for TCL Android and Google TVs is almost similar and doesn’t consume much of your time.
1. Plug in the appropriate cables to the power source and switch it on.
2. Turn on your TCL Google TV and fetch the remote.
3. Press and hold the Home button and the OK button simultaneously for about 10 seconds.
4. The pairing process will begin and the TCL remote will be connected to the TV within a few seconds.
Can I Pair TCL Remote without Pairing Button?
Yes, if the Pairing button is missing on your TCL Roku remote, don’t worry. There’s an alternative way to pair your TCL Roku remote without the pairing button.
1. Power off your TV using the physical Power button.
2. After that, fetch your TCL Roku remote and remove the batteries from the dock.
3. Wait for a minute, re-insert the batteries, and close the dock.
4. Now, power on your TV and put the device into the Bluetooth pairing mode by pressing the Back and Home buttons together for 10 seconds.
5. Now, a green light will blink on your remote control.
6. Bring the remote close to the device and wait for a few seconds until the green light turns off.
After that, your TCL Roku remote is successfully paired with your TV without using the pairing button.
Why Is My TCL Remote Not Pairing With the TV?
Sometimes, the remote may struggle to pair because of a few reasons. The below troubleshooting steps will help you get to fix the TCL remote not working issue.
- Clear the obstacles between your TCL remote and the TV.
- Point the remote directly at the TV.
- Try re-pairing the remote once again.
- Operate the remote within the range of 3 Feet.
- Replace the batteries with newer ones in case expire.
- Replace the remote if there is any external damage.
FAQ
You can use the TCL TV remote control app to turn on and connect your TCL TV without using a physical remote control.
Try downloading the Roku official app using the Play Store or App Store to connect the remote to the TCL Roku TV.
Yes, using the remote codes for TCL TV, you can easily pair the universal remote to TCL TV by auto code search or manual pairing methods.
Disclosure: If we like a product or service, we might refer them to our readers via an affiliate link, which means we may receive a referral commission from the sale if you buy the product that we recommended, read more about that in our affiliate disclosure.